Features
Arrows and indicators
Place straight and curved arrows or custom indicators, set their pivot and offset, and save defaults you reuse across manuals.
Some features on this page are paid. They are marked with a notice like this one right under their heading, so you can tell what works on the Hobbyist plan and what needs an upgrade. See Plans and limits for what each plan includes.
- Audience: Authors who point at parts with arrows or other markers.
- Before you begin: The editor is open on a 3D step.
- Starting point: The step shows the part you want to point at.
- End result: Indicators that sit exactly where you want them, with consistent size and offset.
3D steps: visibility, cameras, and moving parts shows you how to place your first arrow. This page picks up from there.
Placing an indicator
Choose Add Indicator in the toolbar (or the same option in the right-click menu), then pick a type. There are two built-in arrows, Straight Arrow and Curved Arrow, plus any custom indicators you've saved.
While placing, you have two snap modes. Each one has a shortcut you can change in your account (1 and 2 with your preset):
- Point snap is the default. It locks onto holes, edges, corners, and face centers where it can, and otherwise lands on the exact point you click. It's the right choice for most placements.
- Body snap puts a simple box around each body, and offers six placements, one for each face of the box. Use it when you want an arrow on a particular side of a part.
Press Esc once you've placed the last one.
Every indicator you place is attached to the part underneath it, so it moves along with that part. A couple of things you can do from there:
- To keep an indicator where it is while the part moves, select it and unlink it from the part.
- To pick an indicator up and put it somewhere else, use Re-place Indicator.
Edit an indicator
Choose Edit Indicators from the menu to open the Indicator Editor. This is where you set the pivot, color, and placement offset defaults for a type of indicator. The indicator is shown next to a small cube that stands in for the part, so you can see how it will meet a face.
- Indicator Name is what you'll see in your lists.
- Pivot Position and Pivot Rotation (deg) tell Daedum which point of the indicator touches the surface, and which way it points. For an arrow, that's the tip. For a ring, it might be the center. Unlock the pivot fields to type in values, or use Set Pivot and click a snap point on the indicator itself. Flip reverses which way it points into the surface.
- Base Part Offset is the gap between the pivot and the face. It's a relative distance based on the indicator's size, and it's the setting you want when every arrow should sit a little off the surface. Think of it this way: pivot position is where the indicator touches, and offset is how far from the face it floats.
- Auto Scale sizes each new indicator to suit the part it lands on. Turn it off to set a Fixed Scale yourself.
- Appearance is Color for the built-in arrows (a color picker or hex value), or From library for custom ones, which use the look you gave them in your indicator library. You can also assign one of the manual's materials to cover a whole indicator.
Once the settings look right, you have a few ways to keep them:
- Save Custom saves them as a new indicator that shows up in the menu next to the original. For example, you could have an arrow with an offset right next to one without.
- Save as Default for All Manuals makes your settings the starting point for every manual that hasn't changed them.
- Reset goes back to the previous values.
There's another way to change the default size, too: scale one indicator in the scene, then save that scale as the default. Every indicator of that type you place afterwards will start at that size.
Custom indicators
This is a paid feature. Requires a Professional or Commercial plan. Anyone can browse the library and use the built-in arrows and presets.
Custom indicators let you import your own tool or prop from a STEP file, like a screwdriver or a switch, and use it just like an arrow.
- In the Indicator Editor, choose Import from STEP, or upload it from the Indicators tab of your library.
- Wait for it to convert. The model then shows up in the editor.
- Set the pivot so the part of the model you want to point with (the tip of a switch, say) lands on the surface. Use Set Pivot to snap onto a corner or point, then rotate the pivot or Flip it until it faces the right way.
- Save it. It now shows up in the Add Indicator menu.
Imported models are drawn part by part, using the look set in your library. In the Indicators tab of your library, you can:
- Set a material for each body of a custom indicator.
- Choose its thumbnail, which is only there to help you recognise it in the library.
- Drag indicators into folders.
To delete a custom indicator, go to the Indicators tab of your library. The built-in arrows can't be deleted.